SA23004XHQ-Products-Silergy Corp

HomeProductsDC-DCDC-DC ConvertersBuck

SA23004XHQ

Production
5.5V, 4A Single Synchronous Buck Converter
Datasheet
SA23004XHQ 5.5V, 4A Single Synchronous Buck Converter Datasheet
    Part numberSA23004XHQ
    Channel(#)1
    Vin (min) (V)2.8
    Vin (max) (V)5.5
    Switching frequency (min)(kHz)1800
    Switching frequency (max)(kHz)3000
    Vout (min) (V)0.6
    Vout (max) (V)5.5
    Iout (max) (A)4
    Vout2 (min)(V)
    Vout2 (max )(V)
    Iout2 (max)(A)
    Vref accuracy (±%)1.2
    Vout accuracy(±%)
    Control modePeak current control
    Duty cycle (max)(%)100
    Operation modePFM/FCCM
    Iq (typ) (uA)36
    FeaturesEnable,Power good,Auto-discharge,Adjustable soft-start,Low Iq,Wettable flanks package,UVP with hiccup,100% duty cycle,Low ISD,Adjustable switching frequency,Spread spectrum,Cycle by cycle overcurrent protection,Forced PWM,Frequency synchronization,Pre-bias startup
    PackageQFN2×3-9
    Operating temperature range(°C)-40 to 125
    Functional safety categoryCapable
    • 2.8V to 5.5V Input Voltage Range
    • Up to 4A Output Current
    • External Adjustable Output Voltage with ±1.2% Reference Voltage Accuracy
    • 1μA Shutdown Current (Typical)
    • 36 µA Quiescent Current (Typical)
    • Adjustable Switching Frequency of 1.8MHz to 3MHz
    • PWM or PFM Operation Selectable in Light Load
    • Adjustable Soft-Start Time
    • 100% Duty-Cycle for Lowest Dropout
    • Optional Frequency Spread Spectrum
    • Cycle-by-Cycle Current Limit Protection
    • Hiccup Mode Short-Circuit Protection
    • Power Good Indicator
    • Thermal Shutdown
    • Compact QFN2×3-9 Package
    • Automotive AEC-Q100 Grade 1 Certified
    The SA23004 synchronous buck converter has integrated power MOSFETs, an input voltage range of 2.8V to 5.5V, a configurable output voltage from 0.6V to VIN, and a maximum load current capability of 4A. Under light load conditions, it can operate in either pulse width modulation (PWM) mode or pulse frequency modulation (PFM) mode. The soft-start time and 1.8MHz-3MHz switching frequency can be adjusted using external components. 
    The SS/TR pin can be used to control the soft start time or as an input for tracking and sequencing, which allows the output voltage to follow the voltage applied at TR in both directions (up and down) in forced PWM mode.
    When required by the application, if an external clock frequency is applied on the MODE_SYNC pin, the switching frequency will be synchronized to the external clock frequency and the device will operate in forced PWM mode.
    The SA23004 also provides power good indication, undervoltage lockout (UVLO), short-circuit protection, cycle-by-cycle current limit protection, and thermal shutdown.
    The SA23004 is available in a QFN 2mm×3mm-9 pin package.

    Evaluation Board

    • SA23004-1

      Photo of evaluation board

    • SA23004-2

      Photo of evaluation board

    • SA23004-3

      Photo of evaluation board

    SA23004XHQ

    EVB_SA23004XHQ is intended for evaluate 5.5V, 4A single synchronous buck converter. 

    Technical Documentation