| Part number | SY21051FCC |
|---|---|
| Channel(#) | 1 |
| Vin (min) (V) | 7 |
| Vin (max) (V) | 100 |
| Switching frequency (min)(kHz) | 200 |
| Switching frequency (max)(kHz) | 1000 |
| Vout (min) (V) | 1.2 |
| Vout (max) (V) | 24 |
| Iout (max) (A) | 1 |
| Vout2 (min)(V) | |
| Vout2 (max )(V) | |
| Iout2 (max)(A) | |
| Vref accuracy (±%) | 2 |
| Vout accuracy(±%) | |
| Control mode | COT+Ripple |
| Duty cycle (max)(%) | 75 |
| Operation mode | Auto PFM |
| Iq (typ) (uA) | 400 |
| Features | |
| Package | SO8E |
| Operating temperature range(°C) | -40 to 125 |
| Functional safety category |
The SY21051 high-efficiency synchronous Buck converter can deliver 1A output current over a wide input voltage range from 7V to 100V. The SY21051 employs a constant on-time and ripple-based control strategy to achieve fast transient responses. The SY21051 integrates the top FET and bottom FET with very low RDS(ON) to minimize the conduction loss.
Silergy’s constant on-time (COT) ripple-based control method supports high input/output voltage ratios (low duty cycles), and fast transient response while maintaining a near constant operating frequency over line, load, and output voltage ranges. This control method provides stable operation without complex compensation and even with low ESR ceramic capacitors.
The SY21051 also provides cycle-by-cycle current limit, over temperature protection, and output short circuit protection.
The SY21051 is available in a compact SO8E package.
Photo of evaluation board
Photo of evaluation board
Photo of evaluation board
The EVB_SY21051FCC is intended for evaluating 1A, 100V synchronous step down regulator.
| Title | Date |
|---|---|
| Silergy_Catalog_Q2_2026 | 2026-06-12 |
| SO8E | 2022-05-20 |
