HomeProductsAmplifiersCurrent Sense Amplifiers

SY2A55104 (SA59101)

Production
High-Side or Low-Side Bidirectional
Datasheet
SY2A55104 High-Side or Low-Side Bidirectional Datasheet
    Part numberSY2A55104
    FeaturesHigh precise
    DirectionBidirection
    Common mode voltage (min)(V)-0.3
    Common mode voltage (max)(V)26
    Vcc max (V)5.5
    Vcc min (V)3
    Vshunt Input offset (±)(max)(μV)100
    Voltage gain (V/V)50
    Bandwidth (kHz)60
    CMRR (min)(dB)100
    Gain error (max)(%)0.5
    Iq (max)(mA)0.1
    Operating temperature range(°C)-40 to 125
    PackageSOT363
    Pin count6

    ●       Voltage-Output, Current-sense Monitor

    ●       -0.3V–26V Common-Mode Operation Range

    ●       100μA (Maximum) Quiescent Current

    ●       High Accuracy: ±0.5% Gain Error (Maximum)

    ●       Gain: 50V/V (SY2A55104), 100V/V (SY2A55105)

    ●       Amplifier Output Referenced to VREF input

    ●       Shunt Maximum Input Voltage Range:

    o    SY2A55104:

    §   -40mV to 40mV (VCC=5V, REF=2.5V)

    §   1mV to 90mV (VCC=5V, REF=0V)

    o    SY2A55105:

    §   -20mV to 20mV (VCC=5V, REF=2.5V)

    §   1mV to 45mV (VCC=5V, REF=0V)

    ●       Low Offset Voltage(Maximum):

    o    ±100μV (SY2A55104),

    o    ±50μV (SY2A55105)

    ●       0.5μV/°C Offset Drift (Maximum)

    ●       10ppm/°C Gain Drift (Maximum)

    ●       AEC-Q100 Qualified

    ●       Package: SOT363

    The SY2A55104 and SY2A55105 fixed-gain, high-precision, high-side or low-side, current-sense amplifiers with voltage output are suitable for bidirectional (charge /discharge) or unidirectional current measurements. The SY2A55104 provides 50V/V output gain and the SY2A55105 provides 100V/V output gain.

    The SY2A55104/5 use a low-offset, zero-drift architecture and operate across the -0.3V to 26V input common-mode voltage range, which is independent of supply voltage. The precision input offset voltage (VOS) allows the devices to measure the low-voltage drop very accurately.

    The SY2A55104/5 are designed to operate from a 3V to 5.5V supply and draw just 80µA (typ) quiescent current.

    The devices are provided in an SOT363 package and are specified over the extended industrial temperature range of -40°C to 125°C. The device is AEC−Q100 Qualified.

    Technical & Design Documentation