SY2A58119VAA-Products-Silergy Corp

HomeProductsMotor DriversBrushed DC (BDC) Motor Drivers

SY2A58119VAA (SA52106VAA)

Production
Six Half-Bridge Driver with SPI control
Datasheet
SY2A58119VAA Six Half-Bridge Driver with SPI control Datasheet
    Part numberSY2A58119VAA
    Vin (max) !(V)25
    Vin (min) !(V)5.5
    Number of half bridges6
    RDS(on) (HS + LS) !(mΩ)1500
    Peak output current !(A)1.2
    Sleep current !(µA)2
    Integrated FETs(Yes/No)Yes
    Control interfaceSPI
    FeaturesLow power sleep mode, Support paralleled output mode, Support daisy chain functionality, OVP, OCP, SCP, OLD, Undervoltage lockout
    Operating temperature range!(°C)-40 to 125
    PackageQFN5×5-24
    Functional safety category
    • Six Half-Bridge Drivers
    • 0.55A Output Current per Channel
    • Low Power Mode
    • Compatible with 5V/3.3V System
    • Serial Data Interface, up to 5MHz
    • Fault Reporting
    • PWM Capable Outputs for Frequency 80Hz, 100Hz and 200Hz with 8-bit Duty Cycle Resolution
    • Internal over Current Protection, Short Circuit Protection, Open Load Detection, under Voltage Lockout, over Voltage Lockout and Thermal Shutdown
    • AEC-Q100 Qualified
    • QFN5×5-24 Package

    The SY2A58119 is a six half-bridge motor driver solution for automotive, industrial and other mechatronic applications. All the functions can be programmed through a serial data interface.

    The SY2A58119 provides internal shutdown functions with a fault output (SO pin) for over current protection, open load detection, short circuit protection, under voltage lockout, over voltage lockout and thermal shutdown. A low-power sleep mode is also provided. The device is packaged in QFN5*5-24 with exposed pad.

    Evaluation Board

    • 1

      Photo of evaluation board

    • 2

      Photo of evaluation board

    EVB_SY2A58119VAA

    The EVB_SY2A58119VAA is intended for evaluatign six half-bridge driver with SPI control SY2A58119VAA.

    Technical Documentation