SY62510VXS-Products-Silergy Corp

HomeProductsBattery Management ICsBattery Fuel Gauges

SY62510VXS

Production
Fully Integrated Single Series, Lithium-ion/Li-Pol Battery Gauge
Datasheet
SY62510VXS Fully Integrated Single Series, Lithium-ion/Li-Pol Battery Gauge Datasheet
    Part numberSY62510VXS
    DescriptionSingle cell series Lithium-ion/Li-Pol battery gauge
    FeaturesAdvanced S3 algorithm with authentication
    Number of series cellsSingle Cell
    ChemistryLi-ion/Li-Polymer, LiFePO4, Si-Anode
    Capacity (min) (mAh)100
    Capacity (max) (mAh)65000
    Vin (min) (V)2.2
    Vin (max) (V)5.5
    Communication InterfaceI2C
    ImplementationPack/System
    External capacity indication
    Integrated protection
    Cell balancing
    AuthenticationSHA1, SHA-256
    Operating temperature range(°C)-40 to 85
    PackageCSP1.6×1.8-9
    • Operating Voltage: 2.45V to 5.5V
    • Operating Current: 50 µA (Typ.)
    • Sleep Mode Current: 12 µA (Typ.)
    • Patented gauge algorithm: accurate SOC, SOH
    • Automatic compensation for temperature, age, rate and self-discharge
    • Dual ADC for Simultaneous Current and Voltage Measurements
    • On-chip temperature sensor for monitoring system temperature
    • External temperature-measurement network
    • Low-side current sense
    • Supports min 1mΩ current sense resistors
    • SHA-256 and SHA1 authentication
    • Diagnostic lifetime data monitor
    • 400-kHz I2C bus communications interface
    • Package: CSP 1.655mm×1.802mm-9PIN

    The SY62510VXS is a fully integrated 1-series Lithium-ion/Li-Pol battery gauge with authentication. The device communicates via an I2C compatible interface and combines a low-power, high-speed micro-controller, integrated flash memory, peripherals and proprietary algorithm for accurate capacity gauging. The device is suitable for using on the host-side or can be integrated in battery packs.

    The SY62510 provides the battery information such as: remaining battery capacity (mAh), state-of-charge (%, SOC), state-of-health (%, SOH), battery voltage (mV), battery current (mA) and battery temperature (℃).

    Technical Documentation