Programmable Current Limit Switch
![]()
- Parameters
- Features
- Description
| Part number |
SY20845DDBC |
| Vin (min) (V) |
2.5 |
| Vin (max) (V) |
15 |
| Vabs cont. (max) (V) |
30 |
| Iout (max) (A) |
5 |
| Protection mode |
OCP,VCP,OTP |
| Over current response |
Current limiting |
| Current limit (A) |
Adjustable |
| Fault response |
Auto-recovery |
| Ron (typ) (mΩ) |
40 |
| Certification recognition |
|
| Iq (typ) (uA) |
200 |
| Enable logic |
High |
| Soft start |
Adjustable |
| Features |
3.3V/5V/9V clamping voltage, Programmable Current Limit |
| Package |
DFN3×3-10 |
| Operating temperature range(°C) |
-40 to 85 |
| Functional safety category |
|
- Wide Input Voltage Range from 2.5V to 15V with surge up to 30V
- Extremely Low RDS(ON) for the Integrated Protection Switch: 40 mΩ
- Programmable Soft-Start Time
- Programmable Current Limit
- Short-circuit Protection
- Selectable Input Range and Clamping Output Voltage Threshold.
- Enable Interface Pin
- Thermal Shutdown Protection & Auto Recovery
- RoHS Compliant and Halogen Free
- Compact package: DFN3×3-10
SY20845D is a programmable current limit switch with input voltage range selection and output voltage clamping. Extremely low RDS(ON) of the integrated protection N-channel FET helps to reduce power loss during the normal operation. Programmable soft-start time controls the slew rate of the output voltage during the start-up time. Independent enable control allows the complicated system sequencing control. It integrates the over-temperature protection shutdown and auto-recovery with hysteresis. This IC along with small DFN3X3-10 footprint provides small PCB area application.
Evaluation Board
-
Photo of evaluation board
-
Photo of evaluation board
-
Photo of evaluation board
The EVB_SY20845DDBC is intended for evaluating the programmable current limit switch with input voltage range selection and output voltage clamping.
