SY69410BQDQ

l  USB PD3.0 PHY with I²C Interface

l  Current Capability Advertising and Detection

l  CC Attach/Detach Detection as DFP, UFP and DRP

l  Active Cable Detection

l  Cable Orientation Detection

l  BIST Mode Support

l  VBUS Detection Support

l  VCONN Power Control Support

l  VCONN OVP, SCP and Programmable OCP

l  Dead Battery Support

l  Low Power Consumption: typical 11uA with DRP in Low Power Mode

l  VDD range:3-5.5V

l  Thermal Shutdown

l  QFN3*3-16 Package

The SY69410B is a Type-C Port Controller (TCPC) which encapsulates USB Type-C CC logic, USB PD BMC Physical Layer, VBUS detection and VCONN power control.

The SY69410B integrates the CC logic for the USB Type-C connector. Under the control of the TCPM, the SY69410B enables the Port-C with fully port attach/detach, cable orientation, role detection, and USB Type-C current capability advertising function. It can be configured as DFP, UFP or DRP, depending on the application.

The SY69410B integrates the physical layer of the USB BMC power delivery protocol to allow up to 100W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.

The SY69410B integrates 2 independent 700mΩ switches to control the VCONN power for an active cable. It also provides over voltage protection and programmable over current protection for VCONN.