SY205209ABC-Products-Silergy Corp

HomeProductsESD&Surge ProtectionsESD Protection

SY205209ABC (SYT05S05ABC)

Production
Low Capacitance TVS Protection
Datasheet
SY205209ABC Low Capacitance TVS Protection Datasheet
    Part numberSY205209ABC
    ConfigurationUnidirection
    Number of protected signal lines4
    Vrwm(V)5
    Vbr (min)(V)6
    Vbr (max)(V)10
    Vc@TLP 16A (V)10.5
    Vc@Ipp (V)11
    Ipp (A)(8/20μs)8
    Cd (pF)1.2
    Vesd (kV)30
    PackageSOT23-6
    • Transient protection for high-speed data lines
    • IEC 61000-4-2 (ESD) ±30kV (Air) ±30kV (Contact)
    • IEC 61000-4-5 (Surge) 8A (8/20μs)
    • Small package (2.9mm*2.8mm*1.4mm)
    • Protects four data lines
    • Low capacitance: 1.2pF Typical (I/O-GND)
    • Low leakage current: 0.01μA @ VRWM (Typical)
    • Low clamping voltage
    • Back-drive protection for power-down mode
    • Each I/O pin can withstand over 1000 ESD strikes for ±8kV contact discharge

    The SY205209ABC is a quad, low capacitance transient voltage suppressor (TVS) designed to provide electrostatic discharge (ESD) protection for high-speed data interfaces. With typical capacitance of 1.2pF, the SY205209ABC is designed to protect against over-voltage and over-current transient events. It complies with IEC 61000-4-2 (ESD) (±30kV air, ±30kV contact discharge), IEC 61000-4-5 (surge) (7.5A, 8/20μs).

    The low capacitance, small size and high ESD robustness makes SY205209ABC ideal for high-speed lines used in high-frequency interface applications (e.g., VGA & DVI). The low clamping voltage of the SY205209ABC guarantees minimum stress on the protected IC.

    Each SY205209ABC device can protect four high-speed data lines. The SY205209ABC is available in a compact SOT23-6 package.

    Technical Documentation