| Part number | SY2A23006XHQ |
|---|---|
| Channel(#) | 1 |
| Vin (min) (V) | 2.8 |
| Vin (max) (V) | 5.5 |
| Switching frequency (min)(kHz) | 1800 |
| Switching frequency (max)(kHz) | 3000 |
| Vout (min) (V) | 0.6 |
| Vout (max) (V) | 5.5 |
| Iout (max) (A) | 6 |
| Vout2 (min)(V) | |
| Vout2 (max )(V) | |
| Iout2 (max)(A) | |
| Vref accuracy (±%) | 1.2 |
| Vout accuracy(±%) | |
| Control mode | Peak current control |
| Duty cycle (max)(%) | 100 |
| Operation mode | PFM/FCCM |
| Iq (typ) (uA) | 38 |
| Features | Enable,Power good,Auto-Discharge,Adjustable soft-start,Low Iq,Wettable flanks package,UVP with hiccup,100% duty cycle,Low ISD,Adjustable switching frequency,Spread spectrum,Cycle by cycle overcurrent protection,Forced PWM,Frequency synchronization,Pre-Bia |
| Package | QFN2×3-9 |
| Operating temperature range(°C) | -40 to 125 |
| Functional safety category | Capable |
The SY2A23006 synchronous buck converter has integrated power MOSFETs, an input voltage range of 2.8V to 5.5V, a configurable output voltage from 0.6V to VIN, and a maximum load current capability of 6A. Under light load conditions, it can operate in either pulse width modulation (PWM) mode or pulse frequency modulation (PFM) mode. The soft-start time and 1.8MHz-3MHz switching frequency can be adjusted using external components.
The SY2A23006 also provides power good indication, undervoltage lockout (UVLO), short-circuit protection, cycle-by-cycle current limit protection, and thermal shutdown.
The SY2A23006 is available in a QFN2×3-9 package.
Photo of evaluation board
Photo of evaluation board
Photo of evaluation board
Photo of evaluation board
Photo of evaluation board
EVB_SY2A23006XHQ is intended for evaluating 5.5V, 6A single synchronous buck converter.
| Title | Date |
|---|---|
| Automotive Solutions Q4 2025 | 2025-12-02 |
| Consumer Selection Guide Q4 2025 | 2025-12-02 |
| Industrial Designs Q4 2025 | 2025-12-02 |
